Up MGTD15470 » Suspension System » Rear Suspension Prev Next Slideshow

Previous image Next image Index page
Clamping rear springs for assembly-1
Installing clamp bolts
Another view ofInstalling clamp bolts
Rear springs ready for touch up paint
Just need a rear axle
  Back from University Motors-1.JPG - Back from University Motors. The rear axle was sent to University Motors in Ada, MI to be raised to 4.3:1 from 5.125:1. Highway cruising should be a joy.  
rear axle in position
Looking down the axle tube
Rear shackles
Ready to tighten axle to spring-1
Axle to spring hardware install

17 | Back from University Motors. The rear axle was sent to University Motors in Ada, MI to be raised to 4.3:1 from 5.125:1. Highway cruising should be a joy. Download
Image | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | > | »
Total images: 39 | Help