Up MGTD15470 » Suspension System » Front Suspension Prev Next Slideshow

Previous image Next image Index page
LH swivel showing stub axle
Ready for coil spring
Front suspension installed
Note dirt on tire showing alignment
Shims installed under front shock
  Installing forward pair of shims.jpg - The shock mounting bolts are loose and the inboard survace of the shock is levered up with a screw driver. The shims are sliding in from the inboard to outboard direction. The were installed 90 degrees out before. I don't think it matters.  
Levering up shocks
Shims result in new alignment
Shims visible in board corners
Torque front nut install cotter
Dust cover in place

30 | The shock mounting bolts are loose and the inboard survace of the shock is levered up with a screw driver. The shims are sliding in from the inboard to outboard direction. The were installed 90 degrees out before. I don't think it matters. Download
« | < | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 |
Total images: 35 | Help