Up MGTD15470 » Gearbox and Clutch » Gearbox Rebuild and Installation Prev Next Slideshow

Previous image Next image Index page
Missing keepers on First motion shaft brg
Cleaned shaft and gears-1
Measuring Gear selector fork clearance
Wear on Layshaft
Checking endplay of cluster assy
  Oil grooves in cluster gear bushings.JPG - The bushings for the layshaft. They are grooved. It took me a while to realize that the grooving is for channeling oil to the shaft. I thought at first they got smacked on installation.  
New center bearing didn't have a groove
Rayon cord to raise layshaft and cluster gear
Needle bearings first motion shaft-1
Torquing mainshaft nut-1
Welded up rear gearbox support

19 | The bushings for the layshaft. They are grooved. It took me a while to realize that the grooving is for channeling oil to the shaft. I thought at first they got smacked on installation. Download
Image | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | > | »
Total images: 45 | Help