Up MGTD15470 » Gearbox and Clutch » Gearbox Rebuild and Installation Prev Next Slideshow

Previous image Next image Index page
Selector shafts
threaded studs inside rear case
Removing rear case-1
Rear case bearing
Middle bearing
  First motion shaft bearing out-1.JPG - Ok, the offending bearing is out. It was missing its keepers, and I couldn't see the problem until I removed the bell housing and found the keepes in the sludge. But I can't seem to remove the middle bearing (center mainshaft) and in the process I've dinged up the out put flange threads. Time to get advice.  
Finally empty gearbox
Missing keepers on First motion shaft brg
Cleaned shaft and gears-1
Measuring Gear selector fork clearance
Wear on Layshaft

12 | Ok, the offending bearing is out. It was missing its keepers, and I couldn't see the problem until I removed the bell housing and found the keepes in the sludge. But I can't seem to remove the middle bearing (center mainshaft) and in the process I've dinged up the out put flange threads. Time to get advice. Download
Image | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | > | »
Total images: 45 | Help