Up MGTD15470 » Gearbox and Clutch » Clutch Refurbishment Prev Next Slideshow

Previous image Next image Index page
bell housing installed 2
Clutch lever fulcrum pin off side-1
Clutch lever fulcrum pin on clutch side-1
new clutch disc with pressure plate
new pressure plate
  new clutch disk aligned with pilot shart.JPG - Aligning the clutch disk. Thanks to Bob Figenskau for the alignment tool, a used first motion shaft. I installed the clutch while on the hoist, instead of lowering the dressed engine onto a bench or floor. My bench would have held it, but it gave me better access. Tightening the bolts was a bit inconvenient but the engine is heavy enough this way to absorb most of the reaction.  
clutch pivot bellcrank before creating relief radii
radii filed in Clutch bellcrank with rotary file on drill
clutch linkage parts painted
clutch rods from bottom
close up of clutch fulcrum lever installed

20 | Aligning the clutch disk. Thanks to Bob Figenskau for the alignment tool, a used first motion shaft. I installed the clutch while on the hoist, instead of lowering the dressed engine onto a bench or floor. My bench would have held it, but it gave me better access. Tightening the bolts was a bit inconvenient but the engine is heavy enough this way to absorb most of the reaction. Download
Image | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | > | »
Total images: 30 | Help