Up MGTD15470 » Gearbox and Clutch » Clutch Refurbishment Prev Next Slideshow

Previous image Next image Index page
Clutch bellcrank lever on engine sump-1
bell housing showing oil seal gearbox side
Gearbox oil seal
Bell housing new bronze bushings
Brazed and redrilled hole in clutch release fork lever hole
  bell housing installed 2.JPG - Installed the bell housing. I had finally painted the clutch release lever, and was able to install it. I screwed up the oil seal on the first motion shaft, and had to do the job twice. I torqued the bell housing bolts to 19 ft-lbs.  
Clutch lever fulcrum pin off side-1
Clutch lever fulcrum pin on clutch side-1
new clutch disc with pressure plate
new pressure plate
new clutch disk aligned with pilot shart

15 | Installed the bell housing. I had finally painted the clutch release lever, and was able to install it. I screwed up the oil seal on the first motion shaft, and had to do the job twice. I torqued the bell housing bolts to 19 ft-lbs. Download
Image | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | > | »
Total images: 30 | Help