Up MGTD15470 » Engine XPAG TD2 15613 » Water Pump Prev Next Slideshow

Previous image Next image Index page
Pressing in fwd bearing 4
installing fwd circlip
water pump felt and key
fan spacer and pulley in place 4
water pump and engine steady top
  water pump and engine steady installed.JPG - Front view of water pump installed. And a good view of the stabilizing link. The new pulley required four 5x.75mm bolts. My old one was drilled and tapped for two 5mm and two 6mm bolts.  
thermostat2
Branch pipe with hoses
Branch pipe erosion
Hose clamps eight
hoses and branch pipes

15 | Front view of water pump installed. And a good view of the stabilizing link. The new pulley required four 5x.75mm bolts. My old one was drilled and tapped for two 5mm and two 6mm bolts. Download
Image | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 |
Total images: 20 | Help