Up MGTD15470 » Engine XPAG TD2 15613 » Engine Start with Coolant Prev Next Slideshow

Previous image Next image Index page
With fuel line on car
Leaking block drain
Ed Hutcheson came over to help
Toasted the battery charger
Engine set up for starting
  Distributor wouldn't advance.jpg - After a successful but very warm start, we determined with a timing light that the timing wasn't advancing with the throttle. That and the rich mixture probably caused the exhaust to heat up a lot. Turned out the screw under the rotor is pressing the breaker cam shaft and weight pivots down on the weights too hard.  
Weights OK but locking
Distributor parts to go
Rocker cover off to find TDC
 
 

6 | After a successful but very warm start, we determined with a timing light that the timing wasn't advancing with the throttle. That and the rich mixture probably caused the exhaust to heat up a lot. Turned out the screw under the rotor is pressing the breaker cam shaft and weight pivots down on the weights too hard. Download
Image | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
Total images: 9 | Help