Up MGTD15470 » Electrical » Starter & Generator Prev Next Slideshow

Previous image Next image Index page
new brush install for starter field coil
Brushes being positioned in starter
Testing starter off battery Its alive
removing pully from generator
bracket orientation generator
  reassembled generator.JPG - Reassembled generator. The brushes are cleaned and I also cleaned the communtator and regroved the spaces between the contacts. Notice the spade terminals? This may be from a Sprite in the early sixties. Also, the boss for the tach drive is a bit short, so I decided to add a rubber washer to snug the drive up against the boss.  
generator disassembled
Starter Generator finsihed
finished generator
starter generator finished best
Lower mounting for generator

14 | Reassembled generator. The brushes are cleaned and I also cleaned the communtator and regroved the spaces between the contacts. Notice the spade terminals? This may be from a Sprite in the early sixties. Also, the boss for the tach drive is a bit short, so I decided to add a rubber washer to snug the drive up against the boss. Download
Image | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | > | »
Total images: 22 | Help