Up MGTD15470 » Electrical » Electrical Restoration Prev Next Slideshow

Previous image Next image Index page
inspection socket isolation
wiring instrument panel and dash
Finally have ground inspection socket ground screw
Extra fusing 4
Extra fusing 5
  turn signal buzzer polarity reversed.jpg - Turn Signal Buzzer. This simple piezo buzzer (RadioShack #273-060) consumes 5mA at 12VDC, and has a sound pressure of 86dB at a foot. I added jumpers with a bullet which goes to the flasher P(anel terminal) and a ring terminal for the ground. I tested it before I installed the shrink wrap and surprise, it was polarity sensitive. I had to swap the wires for the positive ground system on the car. The idea here is that I didn't want to add a light to my instrument panel, but I wanted some indication of the turn signal operating, since the delay is pneumatic, not based on a cam in the steering.  
three eighths terminal for generator
Ignition coil installed on firewall
Regulator and fuse block installed on firewall
Starter swtich installed on firewall
Testing the relay box with the alternating flasher

31 | Turn Signal Buzzer. This simple piezo buzzer (RadioShack #273-060) consumes 5mA at 12VDC, and has a sound pressure of 86dB at a foot. I added jumpers with a bullet which goes to the flasher P(anel terminal) and a ring terminal for the ground. I tested it before I installed the shrink wrap and surprise, it was polarity sensitive. I had to swap the wires for the positive ground system on the car. The idea here is that I didn't want to add a light to my instrument panel, but I wanted some indication of the turn signal operating, since the delay is pneumatic, not based on a cam in the steering. Download
« | < | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | > | »
Total images: 67 | Help