Up MGTD15470 » Electrical » Electrical Restoration Prev Next Slideshow

Previous image Next image Index page
wiring instrument panel and dash
Finally have ground inspection socket ground screw
Extra fusing 4
Extra fusing 5
turn signal buzzer polarity reversed
  three eighths terminal for generator.jpg - My generator is from an early AH Sprite or MG Midget. It doesn't have ring terminals, it has spade terminals. The field terminal is 1/4 and the Dynamo terminal is 3/8. No problem except I couldn't find a 3/8 female connector anywhere. Finally found one at Northern Hydraulics while I was getting some new sand blasting nozzles. So, I installed them. I considered drilling holes in the spade terminals for the ring connectors, but decided against it.  
Ignition coil installed on firewall
Regulator and fuse block installed on firewall
Starter swtich installed on firewall
Testing the relay box with the alternating flasher
NAPA EL-13 flasher solved problem

32 | My generator is from an early AH Sprite or MG Midget. It doesn't have ring terminals, it has spade terminals. The field terminal is 1/4 and the Dynamo terminal is 3/8. No problem except I couldn't find a 3/8 female connector anywhere. Finally found one at Northern Hydraulics while I was getting some new sand blasting nozzles. So, I installed them. I considered drilling holes in the spade terminals for the ring connectors, but decided against it. Download
« | < | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | > | »
Total images: 67 | Help