Up MGTD15470 » Electrical » Electrical Restoration Prev Next Slideshow

Previous image Next image Index page
Turn Signal relay box wired
Working smaller grommet on right hand loom
Easing firewall grommet down the wire branches
Working regulator wires through grommet
Last branch to pass through the grommet
  Final position of grommet will be closer to the last branch.jpg - I have the grommet too far back now. After installation and coordination with the portion that goes to the turn signal relay, I had to place the grommet much clsoer to the branches for the horn and the distributor.  
Sending forward portion of loom through firewall
Forward loom coiled to keep clean
Working large branch and regulator wires through hole
Finally all the wires through
Initial wire up of regulator horn and fuses

47 | I have the grommet too far back now. After installation and coordination with the portion that goes to the turn signal relay, I had to place the grommet much clsoer to the branches for the horn and the distributor. Download
« | < | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | > | »
Total images: 67 | Help