MGTD15470 » Electrical » Electrical Restoration

email Dave Braun at dave@dbraun99.com (click here)

Taking care of the individual electrical components and setting up the electrical loom.

Wiring behind the driving instruments	Instrument panel rear 3	Behind panel	behind instrument panel before removal of OP WT gauge	weird ground front wing
wire loom on chassis	Instrument panel removed	string of panel lights	Strap type tiedowns	frame to engine ground cowl tower
Regulator needs stray paint removed	Regulator underside	Epoxy edge of regulator cover	Frame to Engine Ground Installed 1	Frame to Engine Ground Installed 2
cleaning panel rheostat	Turn signal switch refurbish0001	Turn signal switch refurbish0003	Turn signal switch refurbish0004	Turn signal switch refurbish0002
Wire loom tinned and finalized	Main lights warning socket choices	dip switch wire reman0001	dip switch wire reman0002	Dip switch rewired
inspection socket isolation	wiring instrument panel and dash	Finally have ground inspection socket ground screw	Extra fusing 4	Extra fusing 5
turn signal buzzer polarity reversed	three eighths terminal for generator	Ignition coil installed on firewall	Regulator and fuse block installed on firewall	Starter swtich installed on firewall
Testing the relay box with the alternating flasher	NAPA EL-13 flasher solved problem	EL-13 Flasher close-up	Testing relay with front and rear bulbs	Drilled holes in back of tool box and preped the ground
Rekay box mounted and TS harness wired	Turn Signal relay box wired	Working smaller grommet on right hand loom	Easing firewall grommet down the wire branches	Working regulator wires through grommet
Last branch to pass through the grommet	Final position of grommet will be closer to the last branch	Sending forward portion of loom through firewall	Forward loom coiled to keep clean	Working large branch and regulator wires through hole
Finally all the wires through	Initial wire up of regulator horn and fuses	Regulator and fuse block tidied up	Right hand side of firewall needs the ground attached	Bagged harnesses
Firewall wired except for grounds	Ground and loom hold down clamp installed	Ground installed	Groundstrap for battery 00	Groundstrap for battery 01
Turn Signal relay box new location 01	Turn Signal relay box new location 02	Wire routing front and rear split	Wire routing along chassis rail	Wire routing rear connection
Battery tray Moss ABS tray and clamps 01	Fuel transmitter internals from Dave Runnings

67 Images | Create web photo albums and photo books with Jalbum | Chameleon skin | Help