Up MGTD15470 » On Going Maintenance » Valve Lash Prev Next Slideshow

Previous image Next image Index page
 
 
 
 
Valve side
  Wrench hanging to emphasize valve position.jpg - The wrench is hanging on five to show its max travel, so I can adjust four while it is completely closed and on the heel of the cam. Frankly, The Click-Adjust is a huge disappointment! I think I've given up on it... I had to shave down the special 1/4W 1/2 drive socket I bought, along with the screw driver end of the click adjust to fit the adjusting screws. Now it seems too weak to hold the screw driver shape when I use the tool. The tried and true feeler gauge method works so well, .020 cold, I used .019 and .021 as a Go-No go. Diane says that I've complained about the Click-Adjust each time I've tried it, and came to the same conclusion each time. Barney Gaylord... you're right on this one!  
Bonnet removed
 
 
 
 

2 | The wrench is hanging on five to show its max travel, so I can adjust four while it is completely closed and on the heel of the cam. Frankly, The Click-Adjust is a huge disappointment! I think I've given up on it... I had to shave down the special 1/4W 1/2 drive socket I bought, along with the screw driver end of the click adjust to fit the adjusting screws. Now it seems too weak to hold the screw driver shape when I use the tool. The tried and true feeler gauge method works so well, .020 cold, I used .019 and .021 as a Go-No go. Diane says that I've complained about the Click-Adjust each time I've tried it, and came to the same conclusion each time. Barney Gaylord... you're right on this one! Download
Total images: 3 | Help