Up MGTD15470 » On Going Maintenance » LED Tail Lights Prev Next Slideshow

Previous image Next image Index page
Comparison of LED LH incandescent on RH
LED assy ready for placement
wired into car using dielectric grease and soldered ends
The LEDs are slightly visible
Both tail lamps on
  Circuit board failure on 2 note fried resistior 01.jpg - One of the boards failed. The brake/turnsignal lights would only function if the side lamps were on. The failure on '2' followed the board when I swapped it side to side. The vendor was helpful, and eventually sent me a new set of LED assemblies, and asked me to test some voltages. A reistor 'smoked' during testing. I surmise it was weak.  
Circuit board failure on 2 note fried resistior 02
 
 
 
 

21 | One of the boards failed. The brake/turnsignal lights would only function if the side lamps were on. The failure on '2' followed the board when I swapped it side to side. The vendor was helpful, and eventually sent me a new set of LED assemblies, and asked me to test some voltages. A reistor 'smoked' during testing. I surmise it was weak. Download
Total images: 22 | Help