Up An MG TD Prev Next Slideshow

Previous image Next image Index page
Head on Bench
Rocker removed pushrods out
Cleaning each tappet
Plug in transverse hole present
Manifold gasket surface
  Installing Manifolds new head gasket already in place.jpg - Everything reassembled. The culprit was Moss' suggestion that "as a .100 over block that the XPEG gasket be used instead of the XPAG Banana Gasket". However, the round hole gasket will not seal a banana block. If either the block or the head is banana, a bonana gasket must be used. Simple answer that experience can solve.  
Setting Valves
Water every where again
Poorly installed core plug
Tonneau installed 2
Tonneau installed

Everything reassembled. The culprit was Moss' suggestion that "as a .100 over block that the XPEG gasket be used instead of the XPAG Banana Gasket". However, the round hole gasket will not seal a banana block. If either the block or the head is banana, a bonana gasket must be used. Simple answer that experience can solve.
Total images: 20 | Last update: 5/10/10 10:33 AM | Help